How to Lubricate Garage Door: This post will show you the crucial procedures to follow while lubricating a garage door to increase its lifespan and reduce noise.
Many individuals opt to ignore and become accustomed to the annoying grumbling, creaking, and screaming noises created by garage doors.
However, you don’t have to put up with that because leaving things alone risked damaging your door.
When you open or close your garage door, it can need some maintenance; if you put off taking care of it, the issue will probably get worse.
One essential element of this is the proper lubrication of all the moving parts.
How to Lubricate Garage Door
Follow the step-by-step directions below to lubricate your garage door
Step 1: Clean the garage door tracks using a vacuum.
The first step in lubricating garage doors is to clean the garage door tracks.
The tracks must be kept clean in order for the rollers to glide along them smoothly as they open and close the door, even though they shouldn’t be lubricated.
To begin, vacuum any dust or large objects off the rails. Then, use a damp rag to wipe away any leftover dirt or dust.
If necessary, you might attempt using brake cleaner for cars to aid in releasing and removing stubborn stains that have been trapped.
Keep scrolling to learn How to Lubricate Garage Door
Step 2: Lubricate Door Hinges and Rollers
Once the tracks have been thoroughly cleaned, it is time to oil various parts. When thinking about how to lubricate garage door rollers and hinges, keep in mind that silicone or lithium-based grease is advised.
To grease the hinges, slowly lift the door (or have someone help you lift it). As the door curves along the track, grease should be sprayed or wiped onto the hinges.
The rollers must then be oiled because they are fastened along the door’s track close to the hinges.
These rollers’ tiny ball bearings can be greased by utilizing the narrower straw attachment to apply grease.
Step 3: Lubricate the Bearing Plates and Springs
You need a step ladder for the subsequent stage. Most garage doors have sprung at the top.
On either side of the springs are the circular bearing plates. The bearing plates and springs should both be lubricated to ensure optimal performance.
The grease is used to lubricate these components and can be sprayed on or properly cleaned. The garage door should be oiled before you open it.
This action will result in a more uniform distribution of the grease. If you see that the door’s springs are bent or otherwise damaged, they might need to be replaced.
Step 4: Lubricate the Top Rail and Arm Bar
The next step in lubricating a garage door is to lubricate the top rail and arm bar.
For those of you who don’t know, the top rail is the part of the door that hangs parallel to the ceiling of the garage.
You may locate the top rail bar by looking at the area of the door where the chain runs.
The area where the chain passes along the top of this rail requires lubrication.
The top rail and the garage door are connected by the arm bar. Grease should also be sprayed or applied to this component to ensure smooth operation.
Step 5: Lubricate the Lock and Test Everything
Apply your lubricant on the garage door lock last. This will prevent the lock from rusting and make locking and unlocking the door simpler.
Reconnect the door’s power source after that and check its functionality. When the door opens and closes, pay close attention to how it sounds and moves to see if it has improved.
It could be time to make an appointment with a garage door specialist to evaluate the problems if lubricating the door doesn’t seem to have solved the problem.
We believe this article on how to lubricate garage doors was helpful. Do well to share this post on various social media platforms. Best regards!